Published procurement activity · 80 tenders
Buyer information published with procurement notices.
The Science, Engineering and Analysis Division (SEAD) of the Health and Safety Executive (HSE) invites competitive quotations for the supply of the following item to their Laboratory located at Harpur Hill, Buxton SK17 9JN: 1 x Benchtop automatic grinding/polishing machine for metallographic sample preparation
HSE`s Science, Engineering and Analysis Division (SEAD) is seeking to purchase a Reach Truck for use at the HSE Science & Research Centre in Buxton.
The Health and Safety Executive (HSE) intends to go to market for a supplier to provide Computational Fluid Dynamics (CFD) and Finite Element (FE) software, including product maintenance and support. This notice provides an overview of the scope of services and expectations to inform potential suppliers ahead of the formal tende
HSE require a 12 x 8 m Hinged lighting columns for an experimental research project. Please include a counterbalance unit for manually raising/lowering columns in your quote. Columns must be designed in accordance with EN40. Columns must be galvanised.
HSE previously ran a procurement exercise, in September 2023, to appoint suppliers to a framework. This opportunity is to allow new and previously appointed providers to bid for a place on a similar framework for the existing and new courses, as well as some new ones that have been added. HSE is looking to appoint several suppli
HSE require an 80 mm valve for an experimental programme. The valve must be suitable for liquid hydrogen service (down to 20 K) and have pneumatic actuation (open/closed). The valve should have an Ex d position indicator rated for ATEX Zone 1 suitable for hydrogen use.
HSE require the supply of liquid hydrogen for use during a research test programme. A quantity up to of 2.4 tonnes is required for each delivery. HSE does not have any existing storage facility for LH2 and has previously relied on the rental of the supply trailer units. HSE are looking for a similar arrangement, aiming to retain
HSE require an 80 mm valve for an experimental programme. The valve must be suitable for liquid hydrogen service (down to 20 K) and have pneumatic actuation (open/closed). The valve should have an Ex d position indicator rated for ATEX Zone 1 suitable for hydrogen use. The valve should have flanged connections (ANSI class 300).
HSE require the supply of hydrogen gas for use during a research test programme. The gas is intended to be used by piping into an existing pressure reduction system which will meter the gas through to a flow management system. The supply should be at least 500 barg (approximately 800 kg, other pressures may be accepted) and be
HSE require a gaseous hydrogen pressure reduction station for use during a research test programme. The PRS will be connected to a bulk hydrogen supply up to 500 barg. The PRS should be able to control a flow of gaseous hydrogen at a set flow rate within the range 20 - 400 g/s. The system should respond to a setpoint which is
Organisation details and tender classifications reflect information published by the original procurement sources. Similar buyer names are grouped only where an official identifier or compatible name and postcode provide a safe link.