Published procurement activity · 81 tenders
Published as Health and Safety Executive
The Chemicals Regulation Division (CRD) wishes to establish a new research and development (R&D) framework with six specific lots (A-F). This framework will be structured into specialism based lots. Each lot is designed to hold more than one supplier to allow a varied skill set across each lot. A specification will be written fo
There is a requirement to replace an outdated in house developed time/pressure test kit which currently runs on obsolete software. The replacement kit would ideally be a commercially available of the shelf item and must meet the standards specified in UN manual of tests and criteria for the Time/pressure test: UN Series 1 / Seri
The COOF has been modified pursuant to regulation 72(1)(b) of the Public Contracts Regulations 2015 ("PCR 2015") and this notice is published for transparency purposes. The current COOF with SSCL is due to expire by 31 October 2025 which means business critical services including the capacity to make payments to employees (i.e.
HSE SD operates a joinery workshop for the bespoke/low volume manufacturing of items in support of our research and incident investigations. The joinery machinery is used to process a range of timber and engineered woods, and other materials such as thermoplastics, mica board, and cement-based fireboard. HSE Science Division is
HSE has a requirement to have a continuous outdoor noise measurement system in place near the explosive testing area and/or close to the site boundary. This is to help monitor noises made on the site, ensure compliance with the Control of Noise at Work Regulations (2005) and to notify when noise limits are exceeded. The equipmen
HSE are seeking an independent expert to contribute in the investigation of a tree felling incident on the A556, Northwich CW8 2DR on 30th January 2025, and to provide an opinion on the causes and relevant factors relating to the incident and provide an expert report to inform any enforcement decision.
Statement of Service Requirement 2 x new hydrogen generators, with the following specifications: • Must be capable of supplying hydrogen on demand for use with analytical laboratory gas chromatography and mass spectrometry (GC-MS) equipment. • Must have a hydrogen output flow of 500 ml/min; please specify maximum output in ml
This equipment is required to enhance the analytical capability of HSE and enable it to meet the requirements of both the Health and Safety Executive (HSE) and external customers. This system would be used for the analysis of very low levels of analytes in complex biological matrices. The analytes of interest are primarily alip
HSE Science & Research Centre (Buxton) has been conducting large-scale liquid hydrogen experiments to assess the hazards around the use of liquid hydrogen. To make accurate flow measurements for safety assessment, HSE requires a gamma densitometer to measure the density of the liquid hydrogen flow. The densitometer will be attac
The Science Division (SD) of the Health and Safety Executive invites competitive quotations for the Supply of the following item to their Laboratory located at Harpur Hill, Buxton SK17 9JN, United Kingdom. The HSE (Health and Safety Executive) Science and Research Centre is Britain's leading industrial health and safety facility
Organisation details and tender classifications reflect information published by the original procurement sources. Similar buyer names are grouped only where an official identifier or compatible name and postcode provide a safe link.