Published procurement activity · 81 tenders
Published as Health and Safety Executive
HSE require a liquid hydrogen flow conditioning module for use during a research test programme. The flow conditioning module should be able to produce a flow of cryogenic gaseous hydrogen at a set flow rate (between 30 - 400 g/s) and temperature (between 25 - 50 K). It is envisaged that the majority of the vaporisation could be
HSE require a 3" vent stack for use with cryogenic hydrogen for an experimental programme. The vent must have interchangeable terminations (miter cut, bullhorn, lambda) which may be on a flanged connection or otherwise joined. The vent stack should be 4 m tall and terminate in a 3" ANSI Class 300 flange. 0.5 m from the top there
HSE require a 25 mm control valve for an experimental programme. The valve must be suitable for liquid hydrogen service (down to 20 K) and have continuous analogue control between 0 - 100% open. The valve should be controlled electrically and be rated for ATEX Zone 1. Ex ia/ib electronics are not preferred- Ex d, e, m etc. are
The Science Division (SD) of the Health and Safety Executive invites competitive quotations for the supply of the following items to their Laboratory located at Harpur Hill, Buxton SK17 9JN. HSE-SD is looking to acquire a suite of EMF equipment. The suite will need to enable the measurement of a range of common emitters (WiFi, p
The Science Division (SD) of the Health and Safety Executive invites competitive quotations for the supply of the following item to their Laboratory located at Harpur Hill, Buxton SK17 9JN. The analyser is required to integrate into the HSE SD ANSTI surface breathing simulator for testing respiratory protective equipment. The AN
The Science Division (SD) of the Health and Safety Executive invites competitive quotations for the Supply of the following item to their Laboratory located at Harpur Hill, Buxton SK17 9JN A pressure vessel to undertake repetitive testing of solid samples (batteries), in which the vessel is opened and sealed several times a day
'The Science Division (SD) of the Health and Safety Executive invites sealed tenders from qualified providers to provide competitive quotations for the provision of a portable, terrestrial 3D laser scanner. All the required equipment will be for our facility located at the HSE Science and Research Centre, Harpur Hill, Buxton, SK
The Science Division (SD) of the Health and Safety Executive invites sealed tenders from qualified and experienced service providers to provide competitive quotations for the provision of an Electrolytic polisher and etcher for metallurgical preparation to replace/upgrade our existing equipment. All the required equipment will b
HSE Science Division is looking to contract a qualified and experienced service provider to provide LEV solutions (design/build/install) that control worker/operator exposure to mists/dusts/fumes and other airborne contaminants generated by this wide range of machinery as well as our experimental test facilities. A site visit is
In the upcoming changes to Approved Document B (ADB) the national fire test standards will be removed. This will mean the only route to compliance when assessing the reaction to fire classification of construction products in ADB is using the Euro classification system. This classification system is defined in BS EN 13501-1 and
Organisation details and tender classifications reflect information published by the original procurement sources. Similar buyer names are grouped only where an official identifier or compatible name and postcode provide a safe link.